Cleaning a mattress, sofa or armchair is not about maximum pressure. It requires material inspection, measured chemistry and reliable moisture recovery. This guide explains a Purezza Scirocco workflow for professionals in Moscow, the Moscow Region and across Russia.
What to inspect before cleaning
Read the care label and manufacturer instructions. Inspect fabric, piping, seams, buttons, glued sections, faded areas and old water marks. For a mattress, assess filling thickness and whether air can reach both sides. If wet cleaning is prohibited, do not use extraction.
Never promise complete stain removal before testing. Check for colour transfer to a white towel, texture changes and rings after drying a small trial area. Photograph existing damage and agree on limitations with the customer.
A low-moisture upholstery-cleaning workflow
- Dry preparation. Vacuum the top, sides, piping, seams and gaps before applying solution.
- Pre-treatment. Select chemistry for the material and soil. Follow dilution and dwell-time instructions.
- Even application. Apply a thin layer and keep the surface from drying before extraction.
- Extraction. Keep the tool level, apply solution while moving and recover moisture immediately.
- Vacuum-only passes. Repeat the route without solution until the visible liquid stream falls substantially.
Which Purezza version suits furniture cleaning?
Both Purezza Scirocco versions provide 360 mbar vacuum, a 15-litre recovery tank and a 14-litre solution tank. The main difference is solution-delivery reserve.
| Parameter | Purezza Siaflo 9 bar | Purezza Aquatec 17 bar |
|---|---|---|
| Vacuum | 360 mbar | 360 mbar |
| Current product-card delivery | 12 bar pump; 9 bar working pressure with a 0.15 jet | Aquatec 250 PSI; set to 15 bar; 3.8 l/min |
| Typical use | Furniture, mattresses, vehicles and regular mobile jobs | High workload, larger volumes and productive tools |
For mattresses, correct matching of pump, jet, flow valve and technique matters more than the model name. Start with the minimum effective flow and confirm the current configuration before ordering.
Mattress-specific cleaning points
| Area | Main risk | Practical approach |
|---|---|---|
| Top panel | Soaking the filling | Small sections, immediate recovery and vacuum-only passes |
| Piping and seams | Soil migration | Avoid flooding and work from the edge towards the centre |
| Side panels | Uneven drying | Treat evenly and expose them to airflow immediately |
Do not cover the mattress immediately after cleaning. Position it so air can move along both faces. Return it to use only after checking the surface, seams, piping and underside.
Drying furniture after Purezza extraction
The extractor removes most liquid, but residual moisture remains in fabric and filling. The U3DP Clean SU-290 directs air along the surface. Its current product page lists 290 W, 3,200 m³/h, 5 kg and sequential connection of up to six units. Check total circuit load, grounding and the 220 V supply before connecting several units.
Video from the Purezza product page: cleaning upholstered furniture.
Inspection, preparation, Purezza extraction and drying.
Download the mattress-cleaning checklistPurezza mattress-cleaning FAQ
Can every mattress be extraction-cleaned?
No. Check the care label, cover material, colourfastness and permission for wet cleaning.
Which Purezza version is better for sofas?
Siaflo suits regular upholstery and mobile work. Aquatec provides more delivery reserve for high workloads. Tool choice and technique remain decisive.
Why do water marks appear?
Typical causes include over-wetting, uneven treatment, soil migration and slow drying.
Can the mattress be used on the same day?
Only after the surface, seams, piping and underside are completely dry.
Does the process suit mobile jobs in Moscow?
Yes. Confirm access to water and a grounded socket, protect the floor and allow enough time for drying.
Comments
No comments yet. Be the first.